126L55970
محصول جدید
Manufacture Part Number: LTC5597
Package: 8-Lead 2mm × 2mm Plastic DFN
Manufacture Company: Linear Technology
اخطار: آخرین موجودی فعلی!
تاریخ در دسترس بودن
The LTC®5597 is a high accuracy RMS power detector that provides a very wide RF input bandwidth, from 100MHz up to 70GHz. This makes the device suitable for a wide range of RF and microwave applications, such as pointto-point microwave links, instrumentation and power control applications. The DC output voltage of the detector is an accurate representation of the average signal power applied to the RF input. The response is linear-in-dB with 28.5mV/dB logarithmic slope over a 35dB dynamic range with typically better than ±1dB accuracy. The detector is particularly suited for measurement of waveforms with crest factor (CF) as high as 12dB, and waveforms that exhibit a significant variation of the crest factor during measurement. To achieve higher accuracy and lower output ripple, the averaging bandwidth can be externally adjusted by a capacitor connected between the FLTR and OUT pins. The enable interface switches the device between active measurement mode and a low power shutdown mode.
Ultra Wide Matched Input Frequency Range: 100MHz to 70GHz
35dB Linear Dynamic Range (< ±1dB Error)
28.5mV/dB Logarithmic Slope
±2dB Flat Response from 100MHz to 60GHz
Accurate RMS Power Measurement of High Crest Factors (Up to 12dB) Modulated Waveforms
Low Power Shutdown Mode
Low Supply Current: 33mA at 3.3V (Typical)
Small 2mm × 2mm Plastic DFN8 Package
I-Grade: −40°C to 105°C Rated /H-Grade: −40°C to 125°C Rated with Guaranteed Log-Slope and Log-Intercept
ESD Rating: 2500V HBM, 1500V CDM
Point-to-Point Microwave Links
SATCOM
Instrumentation and Measurement Equipment
Military Radios
5G, LTE, WiFi, Wireless Networks
RMS Power Measurement
Receive and Transmit Gain Control
RF PA Transmit Power Control