74HC4067D multiplexer/demultiplexer

General description

The 74HC4067; 74HCT4067 is a single-pole 16-throw analog switch (SP16T) suitable for use in analog or digital 16:1  multiplexer/demultiplexer applications. The switch features four digital select inputs (S0, S1, S2 and S3), sixteen independent  inputs/outputs (Yn), a common input/output (Z) and a digital enable input (E). When E is HIGH, the switches are turned off. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.

FEATURES

- Input levels S0, S1, S2, S3 and E inputs:
  - For 74HC4067: CMOS level
  - For 74HCT4067: TTL level
- Low ON resistance:
  - 80 ohm (typical) at VCC = 4.5 V
  - 70 ohm (typical) at VCC = 6.0 V
  - 60 ohm (typical) at VCC = 9.0 V
- Specified in compliance with JEDEC standard no. 7A
- ESD protection:
  - HBM JESD22-A114F exceeds 2000 V
  - MM JESD22-A115-A exceeds 200 V
  - CDM JESD22-C101E exceeds 1000 V
- Multiple package options
- Specified from -40 C to +85 C and -40 C to +125 C
- Typical ‘break before make’ built-in

Applications

- Analog multiplexing and demultiplexing
- Digital multiplexing and demultiplexing
- Signal gating